NEUTRON SERIES MANAGED ACCESS POINT
Can be configured, managed and monitored with several Neutron Series Access Points from the browser-based interface of one Neutron Series Wireless Management Layer 2 PoE+ Switch. After a Neutron Series Layer PoE+ Switch discovers the EWS660AP it can be “added” and set to be “managed” by the Switch. The Neutron Wireless Management solution supports bulk firmware upgrades and other features that can be set and managed across deployed Neutron Series Access Points simultaneously.
DUAL-BAND EXPANDS USER CAPACITY & OPTIMIZES TRAFFIC FLOW WITH BAND STEERING
Featuring Dual-Band concurrent wireless coverage, the EWS660AP supports expanded user capacity, enabling 2.4 GHz and newer 5 GHz devices to simultaneously connect for maximum speed and performance. Band Steering automatically shifts Dual-Band clients to the less congested 5 GHz band, greatly optimizing overall bandwidth traffic on the network.
HIGH POWER LONG RANGE COVERAGE
High transmit power on each band provides more than twice the wireless coverage over mainstream competitors and enables the wireless signal for faster connectivity to client devices.
The EWS660AP is a high-powered, long-range, 3×3 Dual Band Neutron Series Managed Wireless solution AC1750 802.11a/b/g/n/ac Outdoor Access Point that functions as a stand-alone Access Point or as part of an EnGenius Neutron Series Wireless Management solution. It features a high transmit RF power for better outdoor signal penetration.
The EWS660AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS660APs from a Neutron Series Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.
Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11a/b/g/n/ac standards the EWS660AP features wireless speeds up to on its 2.4 GHz band and up to 1300 Mbps on its 5 GHz band, a Gigabit port for connecting to 802.3at-capable PoE Switches. As the EWS660AP is designed to be mounted in high locations where power outlets may be scarce, it also supports PoE (Power-over-Ethernet) IEEE 802.3at for use with an 802.3at-capable PoE injector or 802.3at-capable PoE Switches, drawing up to 22 watts of power.
Made For Harsh Outdoor Environments
IP65-rated enclosure, one of the highest waterproof and dustproof ratings available, designed to withstand extremely harsh environmental conditions including severe and prolonged exposure to sunlight, extreme cold, frost, snow, rainfall, hail and humidity. The housing of the Access Point also has been manufactured to repel ultraviolet (UV) radiation from the sun.
Can be configured to broadcast up to eight (16) SSIDs (8 SSIDs per frequency band). Each SSID can be tagged to a specified network VLAN for different user access tiers based on established access rights.
Fast Roaming When Used With A RADIUS Server
Keeps client devices connected as they roam within the network.
Wireless Traffic Shaping
Gives IT managers the ability to restrict bandwidth on each frequency as necessary.
1- User capacity performance results may vary based on topology configuration, structural and architectural elements, environmental factors, type of data traffic, RF capabilities of client devices, distance, RF interference in the operating environment and other factors.
RF: 2.4 and 5 GHz Frequency Bands
Standard: IEEE 802.11a/b/g/n and ac (draft)
Radio I: 11b/g/n: 2.412~2.484 GHz
Radio II: 11a/n/ac: 5.18-5.24 and 5.26-5.32 and 5.5-5.7 and 5.745-5.825 GHz
Data Rate: Up to 450 Mbps in 2.4 GHz; up to 1300 Mbps in 5 GHz
Flash Memory: 16MB
Internal High Gain Antenna Array supporting both 2.4 GHz and 5 GHz
1 x RJ-45 Gigabit Ethernet (10/100/1000 Mbps) – PoE Capable 802.3at
1 x Reset Button
1 x Power Connector
WLAN (Wireless Connection)
Power Supply: 100 to 240V DC +/-10% 50/60 Hz
Active Ethernet (Power-over-Ethernet IEEE 802.3at)
DC IN, 12V/2A
OFDM: BPSK, QPSK, 26-OAM, 64-QAM, DBPSK, DQPSK, CCK
2.4 GHz: US/Canada 1-11
5 GHz: Country dependent for the following ranges:
36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Supports up to 8 BSSIDs per radio
IP (check validity and DHCP server IP range) MAC
Supports 802.1q SSID-to-VLAN tagging
Supports 802.1d Spanning Tree Protocol
Wireless Mode: 11a/11b/11g/11n
Channel selection (settings vary by country)
Channel bandwidth (Auto, 20 MHz, 40 MHz)
2.4 GHz: 11n only, 11b/b/n mix, 11b only, 11b/g, 11g only
5 GHz: 11n only, 11a/n mix, 11a only
WMM (Wireless Multimedia)
Wireless Management Features (with Neutron Series Switch)
Access Point Auto Discovery and Provisioning
Access Point Auto IP Assignment
Access Point Cluster Management
Remote Access Point Rebooting
Access Point Device Name Editing
Access Point Radio Settings
Access Point Client Limiting
Wireless Security (WEP, WPA/WPA2 Enterprise, WPA/WPA2 PSK)
VLANs for Access Point- Multiple SSIDs
Access Point Status Monitoring
Wireless Client Monitoring
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Secure Control Messaging
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import / Export
Bulk Firmware Upgrade Capability
Tx Power Control
Adjust transmit power by dBm
Web-based configuration (http)
Via web browser, settings are reserved after upgrade
Administrator Username and Password Change
Reboot (press and hold for 2 seconds).
Reset to factory default (press and hold for 10 seconds)
Status Statistic and Event Log
V1, V2c, V3
MIB I, MIB II (RFC1213) and private MIB
Incoming and outgoing wireless traffic shaping
Automatically selecting least congested channel
IP range and bandwidth management
Reboot Access Point by minute, hour, day, or week
Backup and Restore
Save and restore settings through Web interface
Supports Command Line Interface
IP pinging statistics
SysLog and Local Log support
Scanning for available EnGenius APs
WPA/WPA2 Personal (WPA-PSK using TKIP or AES)
WPA/WPA2 Enterprise (WPA-EAP using TKIP)
802.1X RADIUS Authenticator: MD5/TLS/TTLS, PEAP
SSID broadcast enable/disable
MAC Address Filtering, Up to 50 fields
L2 Isolation (Access Point mode)
QoS (Quality of Service)
WMM (Wireless Multimedia)
Environmental & Mechanical
Operating: 90% or less
Storage: 90% or less
Kensington Security Slot
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between devices, radio interference in the operating environment, and mix of devices in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved.
Dimensions & Weights
EWS660AP Dual Band AC1750 Outdoor Access Point
12V/2A Power Adapter
Pole Mounting Bracket
RJ-45 Ethernet Cable
Quick Installation Guide