Home/Routing and Networking/routerboard/RB951G-2HnD


RB951G-2HnD

The RB951G-2HnD is a wireless SOHO Gigabit AP with a new generation Atheros CPU and more processing power. It has five Gigabit Ethernet ports, one USB 2.0 port and a high power 2.4GHz 1000mW 802.11b/g/n wireless AP with antennas built in.

In comparison with previous model RB751G-2HnD, it has more powerful 600Mhz CPU (instead of 400Mhz), more RAM – 128MB instead of 64MB, same form factor and price. The device is very small and will look good in any home or office, wall mounting anchor holes are provided.

Package contains RouterBOARD 951G-2HnD in a plastic case and power adapter.


Product specifications

Details
Product code RB951G-2HnD
CPU nominal frequency 600 MHz
CPU core count 1
Size of RAM 128 MB
10/100/1000 Ethernet ports 5
Wireless chip model AR9344
Wireless standards 802.11b/g/n
Number of USB ports 1
Power Jack 1
PoE in Yes
Supported input voltage 9 V – 30 V
Dimensions 113x138x29mm
Operating System RouterOS
Tested ambient temperature -20C .. +50C
License level 4
Antenna gain DBI 2.5
CPU AR9344
Max Power consumption Up to 7W
USB slot type USB type A
Number of chains 2
Storage type NAND
Storage size 128 MB
Suggested price $79.95

Wireless specifications


2.4 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 30 -96 1000
54MBit/s 25 -80 316
MCS0 30 -96 1000
MCS7 23 -78 200

wireless parameters may be limited in software, depending on your local regulatory limitations


Performance test results

RB951G-2HnD AR9344 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 81.0 983.7 232.0 950.3 269.6 138.0
Bridging 25 bridge filter rules 81.0 983.7 86.0 352.3 87.6 44.9
Routing none (fast path) 81.0 983.7 210.0 860.2 226.9 116.2
Routing 25 simple queues 81.0 983.7 103.9 425.6 106.6 54.6
Routing 25 ip filter rules 56.8 689.8 59.6 244.1 60.5 31.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results