Home/SStructured-Cabling/T3innovation/Net Prowler™


Net Prowler™ Cabling and Advanced Network Tester

Identify, monitor, and correct LAN issues

Tests 10/100/1000 Base-T, IPV4/IPV6, VLAN, DHCP and more

The Net Prowler™ Cabling and Advanced Network Tester takes all the features and functionality of the Cable Prowler™ and adds the capability to identify, monitor, and troubleshoot LAN issues associated with physical layer and link conditions in the network.

  • Supports IPV4 and IPV6 protocols
  • Verifies DHCP connectivity and DNS
  • Pings IPV4, IPV6, and URL addresses
  • CDP, LLDP, NDP, and VLAN detection
  • TCP/UDP Throughput Test
  • Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop
  • Detects and reports current link speed and link capabilities for active Ethernet drops up to 1 Gbps
  • Link light to identify location on a hub/switch/router port
  • Tests CAT3/5e/6/6a Ethernet cable configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
  • Supports up to 8 testing and ID remotes for network & telephone cables
  • Supports up to 20 network and coax ID-only mapping remotes
  • Ability to define Network test name, cable name, save and print all results (cable testing and network testing)

DescriptionDownload
Net Prowler Specification Sheet                                                       PDF Download PDF
Net Prowler Quick Start GuidePDF Download PDF
Net Prowler User ManualPDF Download PDF

Network - PoE Testing

Detects and reports advertised and current link speed and link speed

Ping both IPV4 and IPV6 addresses

Detects the presence of VLANs

CDP/LLDP/ NDP and VLAN identification provides network configuration information

Ping specific URL to verify WAN connectivity

Blinks link light to identify location on a hub/switch/router port

Detects presence of PoE and class of PoE per IEEE 802.3af/at with load test for voltage drop

Net Prowler Application

Preview test results as PDF or CSV

Perform throughput test using the Net Prowler

Update Net Prowler Firmware

Physical Features

High resolution full color graphical display
Displays wire map in color per TIA-568A/B color codes, in pin or pair order (configurable)
Protective silicone holster
Micro USB connector (to export cable reports), RJ45 connector, and coax connector

Measurement Technology Time Domain Reflectometry (TDR)
Cable Measurements Cable Testing and ID: up to 1000 ft (305 m)
Split Pair Detection: 3 ft (1 m) to 1,000 ft (305 m)
Length Measurement: 0 to 1,500 ft (457 m), ± (5%+1ft)
Supports 8 continuity and ID number remotes (RJ-45)
Supports 20 RJ-45 and 20 F-connector ID only remotes
Power over Ethernet Tests for IEEE 802.3af and IEEE 802.3at (PoE Plus) compliant PoE
Tests for classes and loads cable up to 25.5 watts
(at class 4) Identifies Mode A or B (pairs with PoE)
Active Ethernet Indicates advertised speeds of 10/100/1000base-t half or full duplex
Can Link to network at 10/100base-t
Maximum Voltage Parameters refer to the maximum voltage that can be applied to any 2 connector pins without causing damage to the tester.
• RJ Jack: 66 Vdc or 55 Vac
• F-connector: 50 Vdc or Vac
Save Test Results Stores up to 250 Cable or network tests with user defined names
Tone Generation Tone Frequencies: 730 Hz and 1440 Hz
Languages English, French, Spanish, German, Italian
Battery Life For 6 x AA, 9VDC, 2,200 mA-hr (typical) alkaline battery:
Operating – 20 hours typical
Standby – Life of battery (20uA max)
Batteries are included
Altitude 10,000 ft (3048 m) operating
Temperature Operating: 32 to 122°F (0 to 50°C)
Storage: -22 to +140°F (-30 to 60°C)
Humidity 10 to 90% non-condensing
Enclosure High-strength PC/ABS plastic with V0 rating with boot
Withstands 4 foot drop on to concrete
Size 1.85”H x 3.6”W x 6.8”L (4.7 x 9.15 x 17.3 cm)
Weight With batteries: 1 lb 2 oz (510 g)
Safety Compliances CE
Warranty 1 Year