Home/Routing and Networking/routerboard/CCR1009-8G-1S-1S+


CCR1009-8G-1S-1S+

The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU.

CCR1009-8G-1S-1S+ comes with 2GB of RAM, eight Gigabit Ethernet ports (Ether1-4 are in a Switch group), one SFP port and one SFP+ port with 10G support (SFP module not included).

CCR1009-8G-1S-1S+ model have dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).

Also, CCR1009-8G-1S-1S+ supports a Smart card, to store your private key for use in all features that support Certificate based authentication.

SFP+ port supports SFP (1.25G) modules as well.


Product specifications

Details
Product code CCR1009-8G-1S-1S+
CPU nominal frequency 1.2 GHz
SFP DDMI Yes
CPU core count 9
Size of RAM 2 GB
Architecture TILE
10/100/1000 Ethernet ports 8
Number of USB ports 1
Power Jack 2
PoE in Yes
Supported input voltage 14 V – 57 V
Voltage Monitor Yes
PCB temperature monitor Yes
CPU temperature monitor Yes
Dimensions 444x175x47mm
Operating System RouterOS
Tested ambient temperature -20C .. +60C
License level 6
Current Monitor Yes
CPU TLR4-00980CG-10CE
Max Power consumption 35W
SFP ports 1
SFP+ ports 1
USB slot type microUSB type AB
Serial port RS232 + Header
Storage type NAND
Storage size 128 MB
Suggested price $495.00

Performance test results

CCR1009-8G-1S-1S+ Tile 9 core all port test with SFP+
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 974.0 11,828.3 2,817.0 11,538.4 10,491.1 5,371.4
Bridging 25 bridge filter rules 974.0 11,828.3 1,390.0 5,693.4 1,447.6 741.2
Routing none (fast path) 974.0 11,828.3 2,817.0 11,538.4 8,217.1 4,207.2
Routing 25 simple queues 974.0 11,828.3 1,803.0 7,385.1 1,947.2 997.0
Routing 25 ip filter rules 680.4 8,262.8 870.1 3,563.9 878.7 449.9
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results